Home / News / Industry News / Whether the operation of the motorcycle lift is smooth is a very important issue


Whether the operation of the motorcycle lift is smooth is a very important issue

We all know that the smooth operation of the motorcycle lift is a very important issue, which is related to the personal safety of the construction workers, so how can we ensure the smooth lift of the motorcycle lift?

Today I will tell you about the smooth operation of motorcycle lifts. In the early stage of design of a motorcycle lift, each production process must be inspected. The welding parts must be firmly welded. The hydraulic station and other components of the oil cylinder must be inspected before assembly. First, check whether the sealing ring of the oil cylinder has oil spillage. If the ring and cylinder diameter are not tightly combined, replace the new sealing ring, and then test whether the cylinder runs smoothly.

After the problem of the motorcycle lift cylinder is solved, there is still a key component that determines the smooth operation, that is, the hydraulic station. The output pressure of the hydraulic station is stable, and there is basically no problem with the smooth oil supply. In addition to the above two points, you should also pay attention to changing the hydraulic oil regularly, so that each link can meet the operating standards, and the motorcycle lift will naturally run smoothly.

When installing, between the chassis and the cornerstone of the anchor bolts, place a steel plate gasket or the like, and the thickness of such a steel plate gasket needs to be adjusted, and it is more suitable for the adjustment. , which can ensure the verticality of the guide rail. After the rail frame is in a vertical position, the bolts on the four corners should be tightened. After that, the most basic vertical adjustment should be made to the verticality of the fence door frame, and the deposit anchor bolts are also required.

Install the motorcycle lift buffer spring, and then connect the other part of the fence that is not installed to the bolts used in the front half. After that, further adjust the verticality, do a good job of pressing the bolts, and release the brake on the motor used inside the cage.