Home / News / Industry News / How to extend the service life of motorcycle lifts


How to extend the service life of motorcycle lifts

For motorcycle lifts, they work outdoors for a long time, exposed to wind, sun and rain, and rust is inevitable after a long time. Brushing and painting our hydraulic motorcycle lifts can be said to be the main measure at present. For those of us manufacturers, what we should pay attention to before painting is to completely remove the rust on the support rod, the upper shelf, and the hidden bottom frame.

In this regard, the rust removal methods are mechanical rust removal and manual rust removal with rust removers. The use of rust removers is based on chemical principles. The method is very fast and has high rust removal efficiency. But relatively speaking, the use of rust removers The cost of removing rust for the iron plate bracket is higher. Mechanical derusting is a very common method for large steel structures such as steel plates and steel. The rust removal speed is fast, the effect is good, and the cost of rust removal is relatively low. While removing rust, it can also eliminate burrs and debris on the surface, which has a certain beautification effect on the surface. High controllability. The staff can do this work carefully and patiently to ensure that the next rust removal work can be done better.

If the oil leakage of the motorcycle lift is not dealt with in time, it will further aggravate the failure of the motorcycle lift. However, most users do not know how to deal with the oil leakage problem by themselves. Now let me tell you that users can use polymer composite materials and curing agents. Block the oil leak first. After the curing agent solidifies, it will generally not leak again.